Work Journal

A Photo Journal Of Our Work

Osaka Travel Mug

Completed: 12.10.21

The height of the Osaka is what gives the composition an accomplished feel. With this job we printed the artwork to the upper area which was forced upon us due to the nature of the ergonomic grip, but it isn't for bad as the logo sits flush between the grip and lid area for a stunning contrast between all elements.

For this project we used our Osaka Travel Mug (MP20204).

Diecast Model Cars

Completed: 09.10.21

If you're looking for something unique yet fun then look no further than this Diecast Model Car job we did! Small but mighty these little race cars were delicately printed to the side door of each model in 2 closely matched Pantones which pop vibrantly against the glowing white base. All elements are furthered by the stunning level of detail that was taken to produce the models making them highly desirable and a wonderful talking point.

For this project we used our Diecast Model Cars (MP13806).

Premium Fridge Magnet

Completed: 05.10.21

These magnets wouldn't look out of place in most high-street stores for sure! The split quantity of 4 designs is packed with colour but what stood out for us the most was the way the digital print on each magnet produced sharp and intricate detail that would have done the original illustrations proud! What's more is these were also provided with backing cards for furthered desirability will the dome resin finish to each magnet face gave them superior quality and meant they'd last for longer, furthering their brand exposure!

For this project we used our Premium Fridge Magnet (MP20016).

Wellington Boots Pen Pot

Completed: 03.10.21

Maxam have got themselves a product here that is so unique that it's bound to catch wandering eyes! For this job they chose a shiny forest green pair of boots with their artwork printed two opposing positions for maximum brand exposure. The soft feel to each boot give them a more realistic and distinguished look, whilst the small scale in comparison makes them highly unique and a fun little novelty!

For this project we used our Wellington Boot Pen Pot (MP15824).

Seal Soft Toy

Completed: 01.10.21

Soft, snuggly and utterly adorable it's fair to say even grownups will want one of these Seal Soft Toys to pop in the car or have on their desks at work! The toys themselves are produced with high quality and are plush to touch whilst the soft little neckerchiefs have been printed on this occasion using a digital print ensuring sharpness and a delicate level of detail.

For this project we used our Seal Soft Toy (MP18654).

Dopper Original 450ml Bottle

Completed: 30.09.21

There is a whole list load of things we could have said about these Dopper Original Bottles but we'd be here all day! Wow! Trendy, eco and packed with desirable retail qualities they are just stunning to look at and feel smooth and light to hold. The bottles are printed in full colour to the removable white cup piece whilst they are pre-branded with the Dopper logo to the silver mug, consolidating the sensational look to these bottles. (490ml version).

For this project we used our Dopper Original 450ml Bottle (MP22636).

Essentials Gift Set

Completed: 22.09.21

This work Essentials Gift Set is sure to inspire any recipient! Each item was printed using a high quality and premium technique including laser engraving and blind embossing, which looks particularly understated and exceptionally desirable on the notebook. Finally we also printed HSBC's message to the front face underneath the flap of the box to tie the whole set off to perfection.

For this project we used our Essentials Gift Set (MP22463).

Rainbow Sunglasses

Completed: 21.09.21

We've said it before and we'll say it again, monotone products and print are a match made in heaven! Despite the print area being seemingly small the actual print on the arm has come out sharp and distinctive whilst the white print against its black base gives the artwork a place to bounce from and really drive the eye along the edge for next level brand awareness.

For this project we used our Rainbow Sunglasses (MP17428).

Polypropylene Conference Box

Completed: 13.09.21

The striking Pantone matched red boxes is what gives the Ravenscroft logo to the front flap a significant level of dominance. The slight grained touch of these folders gives them a consistent vibrancy in most light conditions, whilst the back was even printed with a recyclable icon to reinforce the credentials of the product and create eco / brand cohesion all in one!

For this project we used our Polypropylene Conference Box (MP15901).

55mm Button Badge

Completed: 12.09.21

The use of space within the 55mm radius of these badges is what really had us jumping for joy with this job! With the base flooded using Monmouthshire Building Society's novel orange it goes down to the message & branding to dictate hierarchy and exposure which is fulfilled with the dictation of the call to action boxes, based centrally to really draw the eye to the event and date.

For this project we used our 55mm Button Badge (MP10319).

Value Branded Face Mask

Completed: 02.09.21

These soft, glowing white face masks have a rich and clean quality that ties in neatly to Clelland & Boyd Opticians brand message. Their 2 colour logo was crisply dye sublimated to a generous portion to the front for a fun yet striking exposure to their branding.

For this project we used our Value Branded Face Mask (MP22139).

A5 Medium Barkby Notebook

Completed: 31.08.21

The relationship between all elements takes this notebook set we produced for Lintbells to the next level. On this occasion we we asked to provide a pen which we were able to produce Pantone matched to the notebooks orange elastic enclosure, and with their logo printed in full colour to the centre of the vibrant white base.

For this project we used our A5 Medium Barkby Notebook (MP20874).

Universal Full Colour Mug

Completed: 28.08.21

Design, design, design! It's just what our friends at Catalyst know and that's no different to the full colour digitally printed wrap that is seen with this Universal Mug. The white base was a no-brainer which allowed each 'C' element pop whilst the blue lid is of a similar nature to their own brand blues - a combination that makes the mugs truly Catalyst's!

For this project we used our Universal Full Colour Mug (MP20695).

Durham ChalkMug

Completed: 23.08.21

Segment have done a cracking job with this ChalkMug! Supplied individually with their own piece of chalk the mugs already start with a truly unique talking point which is furthered with the delicate print of Segments mid green logo. The mugs have cool touch, which combined with the print and matt base creates one of trendiest mugs that will be seen in any kitchen cupboard!

For this project we used our Durham ChalkMug (MP14918).

Postcard A6

Completed: 20.08.21

Made from a sturdy 330-350gsm card and finished with a shimmery gloss lamination to the front these postcards we produced for our friends at HSBC are stunningly unique! The full colour process to the front enabled us to print their detailed design sharply whilst the back of each postcard was left with lines and a stamp mark to give the HSBC team the flexibility to add a bespoke message too.

For this project we used our Postcard A6 (MP13732).